Omega Brand-new Seamaster GMT Timing Watches |
Seamaster Series of Aqua Terra Series of Omega has appeared in 2008, and its pleasing appearance and creative technology of making watches is liked by many watch fans. In 2009, Omega again released the new member of Aqua Terra series of Seamaster – Seamaster Aqua Terra GMT co-axial timing watches.
Seamaster Aqua Terra GMT co-axial timing watch contains the special co-axial 3606 movement and non-scale hairspring balance wheel, and it gets the honorbook from COSC, and the function of timing contains the elevation handwheel equipment. 44mm watchcase is with the process of polishing and mill finishing, the depth of waterproof can reach 150 meters, the 18K red gold and the stainless steel GMT watch bezel contains bilateral rotation, the black physics solid PVD coat and 24-hour scale make it easy to read the time of three time zones.
On the Seamaster Aqua Terra GMT co-axial timing watch, screw type watch head contains the raised lighting surface Omega logo, the double-storey arch watch mirror that is made of sapphire crystal with the process of double-storey reflectionproof, it contains the mill finished lower head with the screw type, we can clearly watch the inner co-axial movement through the sapphire crystal glass.
Seamaster Aqua Terra GMT co-axial timing watch contains the two design of 18K red gold and stainless steel, the edition of 18K red gold has grey deck veins surface and the effect of solar rays with shine from the center to the outer. On the dial plate of the watch, there are three black smaller dial plates. The edtion of all steel use the polishing grey SL deck veins surface, and there are also three smaller dial plates. The watch contains the hour hand, minute hand and the GMT hand, timing big second hand; the smaller second hand dial plate is located at the place of the ninth hour, the 30-minute and 12-hour timers are separately placed at the place of the third hour and the sixth hour.
The 18K gold Omega’s name and logo are polished clearly by the light.
